Example configuration
Preconfigured 2 × 3 × 12 TE distribution board
Two fields, three rows each. Room for the main house plus an annexe or granny flat.
- 6 rows
- 72 TE
- 2 fields
The ready-made configurations are examples that show what the planner can do. We give no warranty that they are correct, complete or functional. They are not designed for any specific installation. A qualified electrician must check every configuration and adapt it to the installation before it is fitted. Terms of use & safety
About this board
Two side-by-side fields of three rows each, 72 slots in total. The first field carries the main switch, surge protection and the house's own circuits. The second is a self-contained set of circuits for an annexe, granny flat or workshop, fed from the same enclosure.
Before reaching its breaker, every circuit lands on its own PE/L/N terminal block (Phoenix Contact PTI 2,5): a real disconnect point for testing or a later change, without unwiring the breaker itself. A dedicated PT 16 N-PE terminal earths the DIN rail.
Other sizes
- 2 × 12 TE
- 2 × 12 TE kompakt
- 2 × 12 TE kompakt + Phönix
- 3 × 12 TE
- 4 × 12 TE
- 2 × 3 × 12 TE
- 2 × 4 × 12 TE
- 5 × 12 TE + 2 UV
Need something else? Build your own in the planner.