Example configuration
2 × 12 TE compact + Phoenix terminals
The compact 1TE FI/LS board, plus a Phoenix Contact PE/L/N terminal on every circuit: a real disconnect and test point before each breaker.
- 2 rows
- 24 TE
The ready-made configurations are examples that show what the planner can do. We give no warranty that they are correct, complete or functional. They are not designed for any specific installation. A qualified electrician must check every configuration and adapt it to the installation before it is fitted. Terms of use & safety
About this board
Same idea as the compact 2 × 12 TE board, but every circuit also gets its own Phoenix Contact PTI 2,5-PE/L/N terminal block before it reaches its FI/LS: a real PE, L and N disconnect point for testing or a later change, without touching the wiring at the breaker.
Row 1 carries the 4-pole main switch, a PT 16 N-PE terminal that earths the DIN rail, then twelve PTI 2,5-PE/L/N blocks (one per circuit) and a CLIPFIX end bracket: all sub-1TE parts, packed edge to edge along the rail rather than each claiming a whole module. Row 2 is the same twelve compact 1TE FI/LS as the plain compact board, four per phase (L1–L3).
Other sizes
- 2 × 12 TE
- 2 × 12 TE kompakt
- 2 × 12 TE kompakt + Phönix
- 3 × 12 TE
- 4 × 12 TE
- 2 × 3 × 12 TE
- 2 × 4 × 12 TE
- 5 × 12 TE + 2 UV
Need something else? Build your own in the planner.